10 mest brukte Nginx-kommandoer som enhver Linux-bruker må kjenne til
Nginx (uttales Engine x) er en gratis, åpen kildekode, høyytelses, skalerbar, pålitelig, fullfunksjons og populær HTTP- og omvendt proxy-server, en e-postproxy-server og en generisk TCP/UDP-proxy-server.
Nginx er kjent for sin enkle konfigurasjon, og lave ressursforbruk på grunn av sin høye ytelse, den brukes til å drive flere nettsteder med høy trafikk på nettet, som GitHub, SoundCloud, Dropbox, Netflix, WordPress og mange andre.
I denne veiledningen vil vi forklare noen av de mest brukte Nginx-tjenesteadministrasjonskommandoene som du som utvikler eller systemadministrator bør ha for hånden. Vi vil vise kommandoer for både Systemd og SysVinit.
Alle disse følgende listen over populære Nginx-kommandoer må utføres som en root- eller sudo-bruker og bør fungere på enhver moderne Linux-distribusjon som CentOS, RHEL, Debian, Ubuntu og Fedora.
Installer Nginx Server
For å installere Nginx webserver, bruk standard distribusjonspakkebehandling som vist.
$ sudo yum install epel-release && yum install nginx [On CentOS/RHEL] $ sudo dnf install nginx [On Debian/Ubuntu] $ sudo apt install nginx [On Fedora]
Sjekk Nginx-versjonen
For å sjekke versjonen av Nginx-nettserveren installert på Linux-systemet ditt, kjør følgende kommando.
$ nginx -v nginx version: nginx/1.12.2
Kommandoen ovenfor viser ganske enkelt versjonsnummeret. Hvis du vil se versjon og konfigurere alternativer, bruk -V
-flagget som vist.
$ nginx -V
nginx version: nginx/1.12.2 built by gcc 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) built with OpenSSL 1.0.2k-fips 26 Jan 2017 TLS SNI support enabled configure arguments: --prefix=/usr/share/nginx --sbin-path=/usr/sbin/nginx --modules-path=/usr/lib64/nginx/modules --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log --http-log-path=/var/log/nginx/access.log --http-client-body-temp-path=/var/lib/nginx/tmp/client_body --http-proxy-temp-path=/var/lib/nginx/tmp/proxy --http-fastcgi-temp-path=/var/lib/nginx/tmp/fastcgi --http-uwsgi-temp-path=/var/lib/nginx/tmp/uwsgi --http-scgi-temp-path=/var/lib/nginx/tmp/scgi --pid-path=/run/nginx.pid --lock-path=/run/lock/subsys/nginx --user=nginx --group=nginx --with-file-aio --with-ipv6 --with-http_auth_request_module --with-http_ssl_module --with-http_v2_module --with-http_realip_module --with-http_addition_module --with-http_xslt_module=dynamic --with-http_image_filter_module=dynamic --with-http_geoip_module=dynamic --with-http_sub_module --with-http_dav_module --with-http_flv_module --with-http_mp4_module --with-http_gunzip_module --with-http_gzip_static_module --with-http_random_index_module --with-http_secure_link_module --with-http_degradation_module --with-http_slice_module --with-http_stub_status_module --with-http_perl_module=dynamic --with-mail=dynamic --with-mail_ssl_module --with-pcre --with-pcre-jit --with-stream=dynamic --with-stream_ssl_module --with-google_perftools_module --with-debug --with-cc-opt='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic' --with-ld-opt='-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -Wl,-E'
Sjekk Nginx-konfigurasjonssyntaks
Før du faktisk starter Nginx-tjenesten, kan du sjekke om konfigurasjonssyntaksen er riktig. Dette er spesielt nyttig hvis du har gjort endringer eller lagt til en ny konfigurasjon i den eksisterende konfigurasjonsstrukturen.
For å teste Nginx-konfigurasjonen, kjør følgende kommando.
$ sudo nginx -t nginx: the configuration file /etc/nginx/nginx.conf syntax is ok nginx: configuration file /etc/nginx/nginx.conf test is successful
Du kan teste Nginx-konfigurasjonen, dumpe den og avslutte ved å bruke -T
-flagget som vist.
$ sudo nginx -T
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok nginx: configuration file /etc/nginx/nginx.conf test is successful # configuration file /etc/nginx/nginx.conf: # For more information on configuration, see: # * Official English Documentation: http://nginx.org/en/docs/ # * Official Russian Documentation: http://nginx.org/ru/docs/ user nginx; worker_processes auto; error_log /var/log/nginx/error.log; pid /run/nginx.pid; # Load dynamic modules. See /usr/share/nginx/README.dynamic. include /usr/share/nginx/modules/*.conf; events { worker_connections 1024; } http { log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; include /etc/nginx/mime.types; default_type application/octet-stream; # Load modular configuration files from the /etc/nginx/conf.d directory. # See http://nginx.org/en/docs/ngx_core_module.html#include # for more information. include /etc/nginx/conf.d/*.conf; server { listen 80 default_server; listen [::]:80 default_server; server_name _; root /usr/share/nginx/html; # Load configuration files for the default server block. include /etc/nginx/default.d/*.conf; location / { } error_page 404 /404.html; location = /40x.html { } error_page 500 502 503 504 /50x.html; location = /50x.html { } } ....
Start Nginx Service
For å starte Nginx-tjenesten, kjør følgende kommando. Merk at denne prosessen kan mislykkes hvis konfigurasjonssyntaksen ikke er OK.
$ sudo systemctl start nginx #systemd OR $ sudo service nginx start #sysvinit
Aktiver Nginx Service
Den forrige kommandoen starter bare tjenesten i mellomtiden, for å aktivere den automatisk start ved oppstart, kjør følgende kommando.
$ sudo systemctl enable nginx #systemd OR $ sudo service nginx enable #sysv init
Start Nginx Service på nytt
For å starte Nginx-tjenesten på nytt, en handling som vil stoppe og deretter starte tjenesten.
$ sudo systemctl restart nginx #systemd OR $ sudo service nginx restart #sysv init
Se Nginx-tjenestestatus
Du kan sjekke Nginx-tjenestens status som følger. Denne kommandoen viser kjøretidsstatusinformasjon om tjenesten.
$ sudo systemctl status nginx #systemd OR $ sudo service nginx status #sysvinit
Created symlink from /etc/systemd/system/multi-user.target.wants/nginx.service to /usr/lib/systemd/system/nginx.service. systemctl status nginx ● nginx.service - The nginx HTTP and reverse proxy server Loaded: loaded (/usr/lib/systemd/system/nginx.service; enabled; vendor preset: disabled) Active: active (running) since Tue 2019-03-05 05:27:15 EST; 2min 59s ago Main PID: 31515 (nginx) CGroup: /system.slice/nginx.service ├─31515 nginx: master process /usr/sbin/nginx └─31516 nginx: worker process Mar 05 05:27:15 linux-console.net systemd[1]: Starting The nginx HTTP and reverse proxy server... Mar 05 05:27:15 linux-console.net nginx[31509]: nginx: the configuration file /etc/nginx/nginx.conf syntax is ok Mar 05 05:27:15 linux-console.net nginx[31509]: nginx: configuration file /etc/nginx/nginx.conf test is successful Mar 05 05:27:15 linux-console.net systemd[1]: Failed to read PID from file /run/nginx.pid: Invalid argument Mar 05 05:27:15 linux-console.net systemd[1]: Started The nginx HTTP and reverse proxy server.
Last inn Nginx-tjenesten på nytt
For å fortelle Nginx å laste inn konfigurasjonen på nytt, bruk følgende kommando.
$ sudo systemctl reload nginx #systemd OR $ sudo service nginx reload #sysvinit
Stopp Nginx-tjenesten
Hvis du vil stoppe Nginx-tjenesten av en eller annen grunn, bruk følgende kommando.
$ sudo systemctl stop nginx #systemd OR $ sudo service nginx stop #sysvinit
Vis Nginx Command Hjelp
For å få en enkel referanseguide for alle Nginx-kommandoer og alternativer, bruk følgende kommando.
$ systemctl -h nginx
systemctl [OPTIONS...] {COMMAND} ... Query or send control commands to the systemd manager. -h --help Show this help --version Show package version --system Connect to system manager -H --host=[[email ]HOST Operate on remote host -M --machine=CONTAINER Operate on local container -t --type=TYPE List units of a particular type --state=STATE List units with particular LOAD or SUB or ACTIVE state -p --property=NAME Show only properties by this name -a --all Show all loaded units/properties, including dead/empty ones. To list all units installed on the system, use the 'list-unit-files' command instead. -l --full Don't ellipsize unit names on output -r --recursive Show unit list of host and local containers --reverse Show reverse dependencies with 'list-dependencies' --job-mode=MODE Specify how to deal with already queued jobs, when queueing a new job --show-types When showing sockets, explicitly show their type -i --ignore-inhibitors ...
Du vil kanskje også lese disse følgende Nginx-relaterte artiklene.
- Den ultimate guiden for å sikre, herde og forbedre ytelsen til Nginx Web Server
- Forsterk – NGINX-overvåking på en enkel måte
- ngxtop – Overvåk Nginx-loggfiler i sanntid i Linux
- Hvordan installerer du Nginx med virtuelle verter og SSL-sertifikat
- Hvordan skjuler du Nginx-serverversjonen i Linux
Det er alt for nå! I denne veiledningen har vi forklart noen av de mest brukte Nginx-tjenesteadministrasjonskommandoene du bør kjenne til, inkludert start, aktivering, omstart og stopp av Nginx. Hvis du har tillegg eller spørsmål å stille, bruk tilbakemeldingsskjemaet nedenfor.